Welcome, Guest

Author Topic: installing package this evening  (Read 4768 times)

Offline asciibaron

  • House Bee
  • **
  • Posts: 99
    • The Elvaton Apiary
installing package this evening
« on: April 04, 2008, 04:24:55 pm »
I got the call on Tuesday that my package was available for pickup on Wednesday or Thursday.  I painted the hive on Wednesday and picked the bees up last night.  When I got home, I put the package in the laundry room (keep the cat away) and mixed up my sugar solution.  After work this evening I'll install the package and cross my fingers that the weather doesn't conspire against me - cold and rainy is in the forecast for the next few days.

I plan on checking the hive and giving them another gallon of sugar water next Saturday. 

Wish me luck!

-Steve  :mrgreen:

Offline Bennettoid

  • House Bee
  • **
  • Posts: 352
  • Gender: Male
Re: installing package this evening
« Reply #1 on: April 04, 2008, 05:29:10 pm »
Good luck.

Offline Keith13

  • Super Bee
  • *****
  • Posts: 1836
  • Gender: Male
Re: installing package this evening
« Reply #2 on: April 04, 2008, 06:36:12 pm »
U will bee okay just remember wear that veil!!!!!!!!

Offline asciibaron

  • House Bee
  • **
  • Posts: 99
    • The Elvaton Apiary
Re: installing package this evening
« Reply #3 on: April 04, 2008, 07:27:07 pm »
well, everything was going great until... I got 2 stings on my right hand - first knuckle on my middle finger and the webbing between the middle and ring fingers.  got stung because i had a very hard time getting the can out - decided to pull the queen out, inspected her and made a hole with a stick in the candy, then put her between 2 frames.

the bees were coming out of the opening left from the queen cage and try as I might, I simply could not get enough leverage on the can.  I finally was able to get my fingers around the rim while prying with the hive tool and then it happened - I dropped the can a inch or so back into the package - this jolt sent the bees into a frenzy.  i backed away as the bees started to slam into me.  I looked down at my right hand and saw two bees dragging their entrails and quickly moved to scrap the stingers off.

I retreated a few feet to regain my composure and then moved back in to remove the can.  this time I was able to get the can released and simply dumped what i could out of the package into the hive.  then I put the package with the hole facing down on top of the frames, spaced another frame out and then put the feeding pail in.  next I put on a deep hive body, then the inner cover and then the outer cover with the top notch closed off.

I go back in tomorrow and remove the package crate and add the missing frames.  I could have done it better had  I known how the queen cage was setup in the crate.    next bees I get will be from a local nuc supplier - getting the can out was my downfall.

-Steve  :mrgreen:

Offline DennisB

  • House Bee
  • **
  • Posts: 206
  • Gender: Male
Re: installing package this evening
« Reply #4 on: April 04, 2008, 07:48:27 pm »
Steve,

This is something that we all went through the first time we hived a package. I guess I can only speak for myself as I had the same problems. They are resilient little buggers though and should do fine.

DennisB

Offline Moonshae

  • Field Bee
  • ***
  • Posts: 988
  • Gender: Male
Re: installing package this evening
« Reply #5 on: April 04, 2008, 09:22:35 pm »
yep. I dropped the queen cage to the bottom of the hive during my first package...reaching through a pile of angry off, shaken out bees to get the cage wasn't the most pleasant experience for the girls. Remember, half of these bees will be dead in 3 weeks anyway, so losing a dozen at hiving doesn't have a very big impact. Plus, it teaches you about what to do in the future. Once you figured out how to get the syrup out, you'll be able to do it that way all the time, the first time. :)
"The mouth of a perfectly contented man is filled with beer." - Egyptian Proverb, 2200 BC

Offline Kimbrell

  • House Bee
  • **
  • Posts: 198
  • Gender: Female
Re: installing package this evening
« Reply #6 on: April 04, 2008, 11:27:40 pm »
I had a similar experience with my first package.  I just could not get the syrup can out.  Fortunately my son was standing by (not too close!) watching me.  I sent him for a pair of needle nose pliers.  They worked great at getting the can out.  Now the pliers stay in my work box.  Very useful!

Offline asciibaron

  • House Bee
  • **
  • Posts: 99
    • The Elvaton Apiary
Re: installing package this evening
« Reply #7 on: April 04, 2008, 11:33:38 pm »
my son was watching and then vanished when the wooden cover came off.  i'll be assembling a tool bag for sure - my hand is doing ok - hurts to make a fist, but the swelling is not bad.

getting stung wasn't that bad, I was more bothered by the bees dive bombing me.  Several of them were hard enough for me to take notice.  I wasn't really prepared for how violent such a small creature can be. 

The hive entrance was busy an hour after I installed them - I saw several bees out on orientation flights - I'm sure they are going to love my cherry and peach trees when they blossom in the next few weeks.

-Steve

Offline reinbeau

  • Super Bee
  • *****
  • Posts: 2504
  • Gender: Female
Re: installing package this evening
« Reply #8 on: April 05, 2008, 07:02:58 am »
Until we began keeping bees I had never experienced the head butting, either.  That can is always a problem, I think, especially the first time.  Hiving your first package is always an adventure!

Offline JP

  • The Swarm King
  • Universal Bee
  • *******
  • Posts: 11709
  • Gender: Male
  • I like doing cut-outs, but I love catching swarms!
    • JPthebeeman.com
Re: installing package this evening
« Reply #9 on: April 05, 2008, 07:11:45 am »
My Youtube page is titled JPthebeeman with hundreds of educational & entertaining videos.

My website JPthebeeman.com http://jpthebeeman.com

Offline Mklangelo

  • House Bee
  • **
  • Posts: 403
  • Gender: Male
Re: installing package this evening
« Reply #10 on: April 05, 2008, 02:00:46 pm »
Don't do what I did last spring.  Make sure your gear is on correctly.  I got stung 19 times...

<img src="http://banners.wunderground.com/weathersticker/miniStates_both/language/www/US/WI/Milwaukee.gif" border=0
alt="Click for Milwaukee, Wisconsin Forecast" height=100 width=150>


If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get a million miles per gallon, and explode once a year, killing everyone inside.
  - Robert X. Cringely

Offline buzzbee

  • Ken
  • Global Moderator
  • Galactic Bee
  • *******
  • Posts: 5930
  • Gender: Male
    • N Central Pa Beekeepers Facebook Page
Re: installing package this evening
« Reply #11 on: April 05, 2008, 02:20:51 pm »
This is why many of us spray sugar syrup on the outside of the package and get the bees a little sticky before installing. It calms them down pretty quickly as they are working to clean themselves

Offline asciibaron

  • House Bee
  • **
  • Posts: 99
    • The Elvaton Apiary
Re: installing package this evening
« Reply #12 on: April 05, 2008, 03:02:55 pm »
http://www.youtube.com/watch?v=5a4a-Tw-qFI

i thought about using this method, but the package crate is of a different design - there is no way i was getting the screen off without causing a massive ruckus.

i was able to go back in the hive today and remove the crate, put in the remaining frames, and adjust the feeder pail.  next batch of feed will be done using the ziploc bag method.  we did that today at the bee class and it seemed very easy.

the one neighbor came over today and see was in awe of the bees - she thinks it's cool.  now i'm waiting for the other neighbor to say something ;)


-Steve

Offline sarafina

  • House Bee
  • **
  • Posts: 340
  • Gender: Female
Re: installing package this evening
« Reply #13 on: April 06, 2008, 02:37:33 am »
Don't do what I did last spring.  Make sure your gear is on correctly.  I got stung 19 times...

That is a lot!  I just hived my first package this evening and didn't get stung and I only had a veil on and a long sleeved t-shirt and velcro bands around my jeans.  I only used my gloves to put the frames back in before I buttoned it up.

I used the sugar water spray and it definitely calmed them down and I also waited until around 6:30 pm this evening to do it.  What fun to sit back and watch the bees march into their new home.

And thanks Kimbrell for the suggestion on the needle nose pliers!!!!  I read it last night and had them handy today and I don't think I would have gotten that syrup can out as easily w/o them.

Offline jimmy_in_texas

  • New Bee
  • *
  • Posts: 33
Re: installing package this evening
« Reply #14 on: April 06, 2008, 11:14:46 pm »
I had the same problem with my two packages saturday, couldnt get a good hold on the can rim, ended up using an old strong speaker magnet, worked great!

I also dropped a queen cage in the hive amongst a lot of bees, talk about moving slowly and carefully! I only got stung twice.

might as well face it, If you want to keep bees,  you will get stung sometimes.

Offline Cindi

  • Galactic Bee
  • ******
  • Posts: 9825
  • Gender: Female
Re: installing package this evening
« Reply #15 on: April 07, 2008, 10:46:48 am »
Jimmy, those old speakers work wonder for metal, off topic here I know, but I use one attached to a rope for getting nails out of places where wood has been burned that had nails in it, amazing.  Yes, I know, off topic, me bad.  Have a wonderful and beautifulest day, Cindi
There are strange things done in the midnight sun by the men who moil for gold.  The Arctic trails have their secret tales that would make your blood run cold.  The Northern Lights have seen queer sights, but the queerest they ever did see, what the night on the marge of Lake Lebarge, I cremated Sam McGee.  Robert Service

Offline Keith

  • New Bee
  • *
  • Posts: 15
  • Gender: Male
Re: installing package this evening
« Reply #16 on: April 07, 2008, 11:35:55 am »
I also had a package I thought the screen was on to good. So I banged it once on its side and cut the screen with a utility knife. Plced open package in the super I was putting on for feed. Left it for 20 minutes came back all had moved down into frames with queen.

Offline Sean Kelly

  • Field Bee
  • ***
  • Posts: 913
  • Gender: Male
  • I Pick; Therefore I Grin
    • Sean's Facebook Page
Re: installing package this evening
« Reply #17 on: April 08, 2008, 11:01:49 am »
... ended up using an old strong speaker magnet, worked great!

Genius!!!  I never thought of using a magnet before!  I love it!  Last year I just put a large screw through the bottom of the can and used that as a handle, but it made a terrible mess.  Looks like I'm adding a old speaker to my cluster of bee tools.  lol

Sean Kelly
"My son,  eat  thou honey,  because it is good;  and the honeycomb,  which is sweet  to thy taste"          - Proverbs 24:13

Offline bassman1977

  • "King Bee"
  • Super Bee
  • *****
  • Posts: 1788
  • Gender: Male
Re: installing package this evening
« Reply #18 on: April 08, 2008, 01:15:57 pm »
I never had a problem getting the can or the queen out, but after I hived my first package I realized that there was a bee in my pants.  Luckily she didn't sting me.  That would have sucked.

I have 5 more packages coming at the end of the month.  I can't wait.
(\__/)
(='.'=)
(''')_(''')

Offline johnnybigfish

  • Super Bee
  • *****
  • Posts: 2039
  • Gender: Male
    • The World of Johnnybigfish
Re: installing package this evening
« Reply #19 on: April 08, 2008, 04:46:09 pm »
The magnets a GREAT idea!!
I've been lucky and havent had trouble getting the can out or dropping the queen box in...So far...
 I do the same as you Cindi!..I use a magnet to pick up nails from my burn piles too!
 Also,....I havent torn the screen front off any packages..Just opened the top....I still have my first 2 empty packages I'm keeping for souvenirs(actually 3 now)..My wife asked me why I was saving them..So, Real quick like, I came up with a great idea as she wanted an answer......So,....I'm gonna make LAMPS out of them!! The bulb will go thru the top where the can hole is! I think I'll make tiny lamps out of my queen cages too!

your friend,
john

 

anything