Beemaster's International Beekeeping Forum
BEEKEEPING LEARNING CENTER => EQUIPMENT USAGE, EXPERIMENTATION, HIVE PLANS, CONSTRUCTION TIPS AND TOOLS => Topic started by: adamant on December 07, 2013, 10:53:53 am
-
(http://s12.postimg.org/k9s38buwp/20131201_160827.jpg) (http://postimg.org/image/k9s38buwp/)
(http://s28.postimg.org/u43igd1a1/20131201_160827.jpg) (http://postimg.org/image/u43igd1a1/)
(http://s10.postimg.org/tiq1cwj6d/20131201_160836.jpg) (http://postimg.org/image/tiq1cwj6d/)
my honey crystallized and I am trying to un crystallize it. I have my unit set at 100 deg. its been a week and the honey is still in the same state. how long does it take?
-
(http://s10.postimg.org/eydjvtdlh/20131201_161615.jpg) (http://postimg.org/image/eydjvtdlh/)
-
Have you checked the temp with a good thermometer? My little power strip that controls the heat maxes out at 104 and the honey liquefies fine.
-
Agree with Vance, check with a different thermometer. That temp should do it after a couple days.
-
I have done the same with an spare refrigerator in our garage. I put together an ardunio controller with 100W bulb. I can liquify 5 gallon pails in 2 days at 100F.
What size bulb are you using and are you sure it is getting up to temp? 100W light bulbs are getting hard to find around here. Most of the time the advertised wattage is some type of "equivalent to" number and by reading the fine print you will see the actual wattage is much less.
-
Using a space heater..
Sent from my SCH-I545 using Tapatalk
-
Great pictures thanks :-D
maybee a fan would help
-
it sure helps to have air circulation, small fan
-
I increased temp to 120 and seems to be working thank you
Sent from my SCH-I545 using Tapatalk