Beemaster's International Beekeeping Forum

ALMOST BEEKEEPING - RELATED TOPICS => FARMING & COUNTRY LIFE => Topic started by: dpence on January 14, 2009, 07:04:23 pm

Title: Cheap way to heat your shop...
Post by: dpence on January 14, 2009, 07:04:23 pm
Wasn't sure where to put this but thought it might fit here.  Some of us have shops we build in during the winter.  I had a friend of mine show me this link, its a pretty good idea I think.  He is in the process of building one, and I intend to heat my new shop with one as well.  Thought I would share the idea since some of us have waste oil around too. 

http://journeytoforever.org/biofuel_library/ethanol_motherearth/me4.html

David

Title: Re: Cheap way to heat your shop...
Post by: Jerrymac on January 14, 2009, 07:55:42 pm
Way back in the day, I worked part time for a guy with a combination used auto sales/junk yard. He had a 55gal barrel filled half way with sand. There was a pipe going from the top of the barrel and out the side of the building for the chimney. There was another container of sorts that we put the old oil in with a line going into the barrel and dripped onto the sand. I believe the line ran in a manner that the fire heated the oil before it got to the end. Once the thing got going it would really get hot. There was a little valve in the line to adjust the oil flow.
Title: Re: Cheap way to heat your shop...
Post by: HAB on January 14, 2009, 08:22:25 pm
Don't know about your location, but in many it is illegal to burn "WASTE MOTOR OIL" due to the lead contained in some waste motor oils.
With that said, IF I had usable oil it sure would be nice to have one. 

Had been thinking about getting a corn burning stove.  Corn is still cheaper to burn than oil here on our farm.
Title: Re: Cheap way to heat your shop...
Post by: dpence on January 15, 2009, 01:23:09 am
We don't have any constraints on the burning of waste oil here.  That could change though.

David
 
Title: Re: Cheap way to heat your shop...
Post by: iddee on January 21, 2009, 10:04:21 am
We had a service station with one like Jerrymac described, except they used ashes about 4 inches deep instead of sand. It worked very well for years until someone put gas instead of oil in it.

They installed electric heat in the new building.  :shock:
Title: Re: Cheap way to heat your shop...
Post by: dpence on January 21, 2009, 02:14:32 pm
We had a service station with one like Jerrymac described, except they used ashes about 4 inches deep instead of sand. It worked very well for years until someone put gas instead of oil in it.

They installed electric heat in the new building.  :shock:

That wasn't good...unfortunately you can't fix stupid people. 
Title: Re: Cheap way to heat your shop...
Post by: David LaFerney on March 16, 2009, 11:15:27 am
We had a service station with one like Jerrymac described, except they used ashes about 4 inches deep instead of sand. It worked very well for years until someone put gas instead of oil in it.

They installed electric heat in the new building.  :shock:

That wasn't good...unfortunately you can't fix stupid people. 

I don't know... I'm guessing that one got fixed.