Beemaster's International Beekeeping Forum
MEMBER BULLETIN BOARD => PHOTO PAGE - MEMBER PHOTOS & BEE-MOVIES HERE! => Topic started by: Irwin on March 28, 2010, 01:36:13 pm
-
I was putting together a 3 1/2 inch shim for my 8 frame hive with an airnail er and here is what happened
http://picasaweb.google.com/irwin453/JustSomePicS#5453723105382295170 (http://picasaweb.google.com/irwin453/JustSomePicS#5453723105382295170)
http://picasaweb.google.com/irwin453/JustSomePicS#5453725408456278626 (http://picasaweb.google.com/irwin453/JustSomePicS#5453725408456278626)
-
Yea, I hate when that happens. Seems the staple gets redirected by the grain of the wood.
-
that sucks. that seems to happen more often when i don't have the pressure high enough. i see that yours are not driving in all the way flush with the wood.
-
Yes it has happen to me.
BEE HAPPY Jim 134 :)
-
that sucks. that seems to happen more often when i don't have the pressure high enough. i see that yours are not driving in all the way flush with the wood.
I unplugged the compresser too plug in the tablesaw to do some thing and it took me two joint's to figure that one out :roll:
-
It didn't take Kathy long to figure it out, and she wasn't even there. She's one smart lady.
-
nope. just shot a lot of nails sideways! :-D
-
And modest, too.
-
iddee, i never know if you are exercising your sarcasm skills. :-*
irwin, i'll try to remember to take pics of the box that i have with the whole side of nails sideways. i wasn't paying attention! it's just one of those things........
-
What really stinks is when you've got your finger there holding it. Done that, went almost through my thumb, and that was with a #8 nail.
I did have the same thing this weekend, took the nailer apart twice before I realized it wasn't the nailer but that I'd unplugged the compresser to plug in the saw and forgot it. DUH!! (my excuse is that I haven't done this for a while and was in a hurry to get it done and distracted!!)
-
What really stinks is when you've got your finger there holding it. Done that, went almost through my thumb, and that was with a #8 nail.
I did have the same thing this weekend, took the nailer apart twice before I realized it wasn't the nailer but that I'd unplugged the compresser to plug in the saw and forgot it. DUH!! (my excuse is that I haven't done this for a while and was in a hurry to get it done and distracted!!)
I had a picture of me holding a frame with a staple comming out right thrugh my fingernail on my old phone., dont take but once like that and you never hold close while shooting again.
I was having trouble getting the staples to recess one nite, like they always do when the compressor is about to kick on, so I thought enough of this I gonna reset the preassure switch. Cranked it up and tried to staple, still wouldn't recess the staples. Went and turned it up again, again no joy! turned it up all the way and still wasn't working. :hissyfit: tore the stapler apart, checked and cleaned all the parts. still didn't work. After midnight by now so gave up and went to the house fuming. Next AM walked to the shop with coffee to further study.... was sittiing there pondedring the problem considering going to buy a new gun, when my eyes swept across a shelf with various cans of paint, rubbing coumpound and ...... a lone bottle of..... "air tool oil" ........ 4 drops in the air hose connection... been working like a top every since. :roll: Aint no fixing stupid.