Beemaster's International Beekeeping Forum

BEEKEEPING LEARNING CENTER => EQUIPMENT USAGE, EXPERIMENTATION, HIVE PLANS, CONSTRUCTION TIPS AND TOOLS => Topic started by: adamant on November 15, 2011, 05:51:57 pm

Title: osb board (plywood type of wood) ok for nuc's and swarm traps?
Post by: adamant on November 15, 2011, 05:51:57 pm

i can get a lot of osb cut offs.. will that type of wood be ok for nucs and swarm traps?

Title: Re: osb board (plywood type of wood) ok for nuc's and swarm traps?
Post by: asprince on November 15, 2011, 06:53:59 pm

I know a commercial guy that sells a couple of thousand nucs every year. His nucs include bees box and frames. The boxes are made from an osb product that is prepainted. The bees are healthy and the boxes look good.


Steve

Title: Re: osb board (plywood type of wood) ok for nuc's and swarm traps?
Post by: AllenF on November 15, 2011, 08:04:38 pm

You can't beat the price of free wood and you can keep a lot of paint on it.  And even if you have to rebuild in so many years, free wood is nice.

Title: Re: osb board (plywood type of wood) ok for nuc's and swarm traps?
Post by: BlueBee on November 16, 2011, 02:41:14 pm

I agree with Allen; OSB won’t last forever in Northern weather, but with paint you might get 5 years out of them.  I would use it.

Title: Re: osb board (plywood type of wood) ok for nuc's and swarm traps?
Post by: danno on November 17, 2011, 09:56:19 am

swarm traps will last many seasons because they dont sit out in the weather all year.

Title: Re: osb board (plywood type of wood) ok for nuc's and swarm traps?
Post by: JackM on November 17, 2011, 10:25:28 am

Even painted I don't think I would use it up her in the Pacific Northwest, maybe for temp nucs, it cannot handle prying the frames out, if not protected on all sides will absorb moisture.  AND not sure what type of glue they use to make it.

Title: Re: osb board (plywood type of wood) ok for nuc's and swarm traps?
Post by: SEEYA on December 22, 2011, 10:41:34 am

I have a couple of sheets nailed to the side of a shed, unpainted, but under the eaves and still in good shape. I have been meaning to paint that shed for at least 5 years.

>>what type of glue they use to make it.
That's the most important detail.