Beemaster's International Beekeeping Forum
BEEKEEPING LEARNING CENTER => GENERAL BEEKEEPING - MAIN POSTING FORUM. => Topic started by: newbee101 on November 06, 2005, 03:49:18 pm
-
Anyone ever use it? I bought 3 for my hives. It is a thick black plastic with a thin layer of foam inside of that. I used velcro to keep it together and push pins around the upper entrances.
(http://www.acmepainting.com/3hives.jpg)
-
Looks trim and clean.
Have you installed your mouse guards yet?
-
I used that a couple of years ago, but after the winter (It was around -20F that year) the foam started to peel away from the plastic, and crumble. But, I don't know about your climate or if they installed different foam and so on.
Have you installed your mouse guards yet?
Your going to have to, that foam on the outside makes real nice mousie beds =\
-
Anyone ever use it? I bought 3 for my hives. It is a thick black plastic with a thin layer of foam inside of that. I used velcro to keep it together and push pins around the upper entrances.
]
Sorry but, the cover should be respirative. Plastic keeps moisture inside and you boxes will be rotten soon. Paint loosens first.
Hive is moist and warm and it exrecets moisture. The movement of moisture stops to the plastic. There should be a gap for air, from where moisture ventilates away.
In Finland we have a lot of houses where owner has installed "outer water cover" or "heat cover". If moisture will not escape from structure, home is soon a mould ball.
I use insulated boxes, but 30 years ago I had mere wood like you.
Here is both wooden in a carry and styryfoam on the ground.
http://bees.freesuperhost.com/yabbfiles/Attachments/Kuva_036.jpg
-
I wrapped some nucs in foam last year. It was the first time I've wrapped any hive and the condensation was terrible. I've never really wrapped a real hive.